How long does a dishwasher take to run?

A dishwasher saves you the task of having to labor in the sink giving you more time to handle other tasks while it runs. Besides, the use of a dishwasher aids to save water which saves you money in the long run.

So, how long does the dishwasher actually run? It takes between 1 to 4 hours for a complete cycle. The time range is huge as there’s no standard time for all dishwashers. There are several factors that affect how long it takes to get your dishes sparkling clean.

Factors that affect the duration of a dishwasher cycle

The main components that affect the length of time a dishwasher runs are;

The brand

Various brands that manufacture dishwashers have set up their products with different designs. This in turn affects how they operate.

For example, some Bosch dishwashers take less than an hour for the express cycle. While it may take up to 2.5 hours for the eco-mode cycle.

Age

Newer dishwasher versions take longer when compared to the older generation washers. This change is due to the amendments made to the federal energy and water use guidelines. The guidelines set are there to ensure that the appliances use less water and energy. This makes them more efficient and sustainable.

Newer models run longer with this adjustment to improve performance with minimal water and energy use.

A new dishwasher takes longer in the first run to give the sensors adequate time for calibration. You shouldn’t interrupt this process until the dishwasher has finished cleaning.

Cycle Chosen

There are about 8 dishwasher cycles programmed. The cycles are set up for different types of dishes and the type of wash needed. It will thus affect the time it takes to complete the cleaning process.

The most common cycles include normal, delicate, eco, pre-wash, sanitize, heavy and fast. Fast and pre-wash will definitely take a shorter time to run compared to the other cycles.

As you set up and run the dishwasher take note of the cycle to have a rough idea of how long the process will take. It’d be wise to have a record of the time taken for the different cycles on your machine for reference.

Loading

In case you didn’t know this, you should run your dishwasher on a full load only. If you’re not able to achieve a full load, running it three-quarter way is also acceptable.

If you run the machine in a half or quarter load, you’ll take less time. Yet, you’ll end up incurring more expenses as more water and energy is used up in the runs.

Moreover, ensure that you also don’t overload the dishwasher. It’ll take longer and you’ll not get a satisfactory level of cleanliness.

When loading the dishwasher, give ample space between the plates and glasses. This creates adequate room for the water to move around and do the cleaning. Also, ensure that the utensils you need washing land on the right rack- the top or bottom.

Degree of Dish Soiling

The degree of dish soiling refers to how dirty your dishes are before putting them in the dishwasher. If they’re very dirty, the sensors of the dishwasher will prolong the run time. This is to ensure that they’re clean.

If you’re aiming at shorter cleaning times, you can opt to rinse them before loading them in the machine. Take note, it’s not required to rinse, this is a preference.

Dishwasher Settings

Aside from the dishwasher cycles, there are other settings that affect the run time of the washer.

There are settings on the mode of drying, extra-hygiene and settings on the stages. When you opt to add extra steps or settings like extra-drying, it’d take longer to do the set task.

Be aware of your dishwasher settings to get great performance at a reasonable run time.

Water Quality

The quality of water in use does affect the dishwasher run time. Limescale and hard water take a longer time to heat up in order for the cleaning process to begin.

The hard water interferes with the sensors which results to longer wash cycles. Also, any mineral build-up in the machine affects the quality of water increasing the run time.

It’s important to check on the quality of water you’re using. Also, often clean the dishwasher to remove the accumulated minerals. You can reduce the mineral build up using cleaning tablets.

How do I know if my dishwasher cycle times are too long?

Your dishwasher cycle is too long if it takes more than 4 hours to run.

With frequent use of your dishwasher machine, you’re able to determine the average time it takes. This is irrespective of the cycle and other settings in place.

When it takes longer than you’re used to, you should be a bit concerned and identify the issue. For new machines, record the run times for future comparisons. Start recording after sensor calibration in the first run.

Another option is to make use of the user guide that comes with the product. You’ll learn how to use the machine. It also gives estimates of dishwasher run times for the different cycles.

Troubleshooting for shorter Dishwasher Runs

If your dishwasher is taking longer than usual to clean, a few options to look into include;

1. Check your Water Temperature and Pressure

Ensure that the water entering the dishwasher is not cold. The water should be hot with a temperature of between 120 to 150 degrees Fahrenheit.

With cold water, the heating element takes longer to heat up the water. The water needs to be hot before cleaning can begin. This, in turn, prolongs the dishwasher run time. 

Apart from the temperature, also check the pressure. If the water pressure is low, it means that not enough water is entering the machine as needed. The pressure of water should be between 4 to 140 PSI.

2. Adjust your Dishwasher Settings

Remove extra settings that prolong your wash such as extra drying. Also, use the specific cleaning cycle depending on the condition of your dishes.

3. Inspect the Machine Insulation System

When the insulation system does not work, the heat generated is lost to the surrounding. This adds to the time the washer runs as the heating element needs to keep reheating.

To fix this, check the padded tub insulation that boarders the dishwasher frame. Ensure that it is intact. If it’s damaged, remove it and get a replacement. 

4. Confirm the Heating Element is working

The heating element starts of the process of cleaning in a dishwasher. It’s responsible for heating the water that is then circulated to the top and lower rack. If the heating element does not work properly, the operation of the machine is affected.

To check on the condition of this heating element, use a multi-meter to determine the ohms.

5. Check for Mineral and Material Build up

Any build up in the dishwasher affects how the sensors work. They default to the longer dish washing cycles, affecting running time.

There are several ways to clean the dishwasher depending on the amount and type of buildup. There’s an option to scrub, use of vinegar or running the dishwasher empty with detergent. 

Leave a Comment

Your email address will not be published. Required fields are marked *